First of all, this
Sawmill is portable!
So you can take the sawmill to the log. This will allow you to avoid
having to pull the log along the ground which will cause sand and earth
to be embedded in the bark. Sand and dirt in the bark will dull your chain
quickly.
Quick Set Up
Just make sure all four legs stand firmly on the ground - preferably in
a level spot.
Roll Logs up to
Sawmill
The sawmill is designed to allow the logs to be rolled directly from a
log table onto the log bed and to be sawn at working height. You can build
a makeshift log table out of smaller logs, or you can construct a stepped
ramp out of lumber.
Cutting Process
Now the fun part! Roll the log onto the log bed and wind it up to working
height. Saw off the outer slab and the first, non-edge board. Turn the
log and repeat on the other side. Raise the log on edge and saw out planks
and boards. (Cut Parallel to the log center.) Turn the log and remove
the outer slab. Then stand the surface boards on edge and cut the wane
off.
Video Included!
Every delivery includes an instructional video and a 40 page instruction
manual. Each Logosol owner not only gets a sawmill, but our entire body
of know-how regarding lumber sawing. We at Silvana are always available
to discuss your specific sawing questions, including how to tune your
sawmill to cut the best lumber possible!
